Schengen visa photo 35×45 mm
35×45 mm · 413×531 px at 300 dpi · head 70%–80%
- No upload
- Exact target size
- Batch ready
Drag images here, or click to choose
JPG / PNG / WebP / HEIC · up to 25MB each · batch supported
Files never leave your device — everything runs in your browser.
Crop to spec
Drag to reposition, scroll or use the slider to zoom.
Progress
That file could not be processed
Specifications
| Field | Value |
|---|---|
| Size in mm | 35 × 45 mm |
| Size in inches | 1.38 × 1.77 in |
| Pixels at 300 dpi | 413 × 531 px |
| Output resolution | 300 dpi |
| Head height | 70% – 80% |
| Background | light grey or white |
| Print sheet | 8 × per 6x4 in sheet |
What this spec actually requires
A Schengen photo must be no more than 6 months old, 35×45 mm, with the face covering 70–80% of the height and at least 3 mm of background above the head. Glasses are allowed if the eyes are fully visible and there is no glare.
How the crop is guided — and what is not automated
The frame is locked to the 35:45 ratio and two horizontal guides mark the 70%–80% head band. You position the face; the tool does not guess where it is. That is deliberate: automatic face detection fails on babies, head coverings, glasses and profile photos, and a wrong auto-crop is worse than a manual one because you cannot see the mistake until the photo is rejected.
Backgrounds: solid, not magic
A new background colour is applied by compositing, not by hair-level matting. That works when the source is a transparent PNG (a cut-out) or when the new colour is close to the old one. It will not turn a busy café wall into clean white — for that, photograph against a plain wall in the first place, which is also what the acceptance rules assume.
Printing: 4×6 with no scaling
The print sheet is 1800×1200 px at 300 dpi — a 4×6 inch page with 8 copies and thin cut lines. In the print dialog choose 4×6 paper, 300 dpi, and turn OFF “fit to page”: scaling is the single most common reason a correctly sized photo prints at the wrong size.
Common reasons this photo gets rejected
- Head touching the top edge — the 3 mm gap is mandatory
- Red-eye or glare from flash on the glasses
- Smiling: neutrality is checked by the consulate
Compliance wording
This tool produces a file that matches the published technical specification (dimensions, head ratio, resolution, background). It cannot promise that a specific officer accepts a specific photo, and neither can any tool — so we do not say “guaranteed to pass”.